In Stock See Store Availability
Store Location | Available |
---|---|
Kotara | 1 |
Maitland | 1 |
Online | 1 |
Rhino-Rack RLKS4
Rhino-Rack RLKS4 2500 Leg Spacer (34mm)
- Low Stock. Act Quickly
- Genuine Australian Stock
- Installation Available
Details
The RLKS4 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 34mm in height.
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like our legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 8 Spacer Blocks (max height 34mm)
- 2 x M6 x 55mm Bolts
Features
These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like our legs, they are strong and flexible.
All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the RLK2500HALF-JB JB Spacer / Height Adjustor.
This kit includes:
- 8 Spacer Blocks (max height 34mm)
- 2 x M6 x 55mm Bolts
Specifications
SKU | RLKS4 |
---|---|
Model # | RLKS4 |
Barcode # | 9321911020873 |
Brand | Rhino-Rack |
Shipping Weight | 0.3700kg |
Shipping Width | 0.100m |
Shipping Height | 0.050m |
Shipping Length | 0.190m |
Assembled Length | 0.190m |
Assembled Height | 0.050m |
Assembled Width | 0.100m |
Reviews
Availability Information
Backorder Arrival Estimates
Our estimates are based on the average time for the specified product to be delivered from the supplier to our warehouse. We are unable to provide accurate estimates for delivery to a customers address, as delivery times vary greatly depending on final location.
Once a backorder has been placed one of our Customer Support Staff will assess more accurate delivery times and advise before the order is placed with our supplier. This is to ensure as much transparency to our customers as possible.
If you have any questions or concerns about product backorders, please reach out via our Contact Us page or calling on (02) 4941 4499